View TX2-12V_28413.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TX
TESTING
New pin layout (LT type) added. Best seller with broad lineup and AC 2000 V breakdown voltage.
3. Nominal operating power: High sensitivity of 140mW By using the highly efficient polar magnetic circuit "seesaw balance mechanism", a nominal operating power of 140 mW (minimum operating power of 79 mW) has been achieved. 4. High contact capacity: 2 A 30 V DC 5. Compact size 15.0(L) x 7.4(W) x 8.2(H) .591(L) x .291(W) x .323(H) 6. The use of gold-clad twin crossbar contacts ensures high contact reliability. *We also offer a range of products with AgPd contacts suitable for use in low level load analog circuits (Max. 10V DC 10 mA). *SX relays designed for low level loads are also available. 7. Outstanding vibration and shock resistance. Functional shock resistance: 750 m/s2 Destructive shock resistance: 1,000 m/s2 Functional vibration resistance: 10 to 55 Hz (at double amplitude of 3.3 mm .130 inch)
TX RELAYS
Destructive vibration resistance: 10 to 55 Hz (at double amplitude of 5 mm .197 inch) 8. Sealed construction allows automatic washing. 9. A range of surface-mount types is also available SA: Low-profile surface-mount terminal type SL: High connection reliability surfacemount terminal type SS: Space saving surface-mount terminal type
Compliance with RoHS Directive
FEATURES
1. 2,000 V breakdown voltage between contact and coil The body block construction of the coil that is sealed at formation offers a high breakdown voltage of 2,000 V between contact and coil, and 1,000 V between open contacts. 2. Outstanding surge resistance. Surge breakdown voltage between open contacts: 1,500 V 10x160 sec. (FCC part 68) Surge breakdown voltage between contact and coil: 2,500 V 2x10 sec. (Bellcore)
TYPICAL APPLICATIONS
1. Communications (xDSL, Transmission) 2. Measurement 3. Security 4. Home appliances, and audio/visual equipment 5. Automotive equipment 6. Medical equipment
ORDERING INFORMATION
TX 2
Contact arrangement 2: 2 Form C Surface-mount availability Nil: Standard PC board terminal type or self-clinching terminal type SA: SA type SL: SL type SS: SS type Operating function Nil: Single side stable L: 1 coil latching L2: 2 coil latching LT: 2 coil latching Terminal shape Nil: Standard PC board terminal or surface-mount terminal H: Self-clinching terminal Nominal coil voltage (DC)* 1.5, 3, 4.5, 5, 6, 9, 12, 24, 48V Contact material Nil: Standard contact (Ag+Au clad) 1: AgPd contact (low level load); AgPd+Au clad (stationary), AgPd (movable) Packing style Nil: Tube packing X: Tape and reel (picked from 1/3/4/5-pin side) Z: Tape and reel packing (picked from the 8/9/10/12-pin side)
Notes: 1. *48 V coil type: Single side stable only 2. In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay.
All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd.
TX
TYPES
1. Standard PC board terminal
Contact arrangement Nominal coil voltage 1.5V DC 3V DC 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC 48V DC Single side stable Part No. TX2-1.5V TX2-3V TX2-4.5V TX2-5V TX2-6V TX2-9V TX2-12V TX2-24V TX2-48V 1 coil latching Part No. TX2-L-1.5V TX2-L-3V TX2-L-4.5V TX2-L-5V TX2-L-6V TX2-L-9V TX2-L-12V TX2-L-24V -- 2 coil latching (L2) Part No. TX2-L2-1.5V TX2-L2-3V TX2-L2-4.5V TX2-L2-5V TX2-L2-6V TX2-L2-9V TX2-L2-12V TX2-L2-24V -- 2 coil latching (LT) Part No. TX2-LT-1.5V TX2-LT-3V TX2-LT-4.5V TX2-LT-5V TX2-LT-6V TX2-LT-9V TX2-LT-12V TX2-LT-24V --
2 Form C
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs. Note: Please add "-1" to the end of the part number for AgPd contacts (low level load).
2. self-clinching terminal
Contact arrangement Nominal coil voltage 1.5V DC 3V DC 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC 48V DC Single side stable Part No. TX2-H-1.5V TX2-H-3V TX2-H-4.5V TX2-H-5V TX2-H-6V TX2-H-9V TX2-H-12V TX2-H-24V TX2-H-48V 1 coil latching Part No. TX2-L-H-1.5V TX2-L-H-3V TX2-L-H-4.5V TX2-L-H-5V TX2-L-H-6V TX2-L-H-9V TX2-L-H-12V TX2-L-H-24V -- 2 coil latching (L2) Part No. TX2-L2-H-1.5V TX2-L2-H-3V TX2-L2-H-4.5V TX2-L2-H-5V TX2-L2-H-6V TX2-L2-H-9V TX2-L2-H-12V TX2-L2-H-24V -- 2 coil latching (LT) Part No. TX2-LT-H-1.5V TX2-LT-H-3V TX2-LT-H-4.5V TX2-LT-H-5V TX2-LT-H-6V TX2-LT-H-9V TX2-LT-H-12V TX2-LT-H-24V --
2 Fom C
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs. Note: Please add "-1" to the end of the part number for AgPd contacts (low level load).
3. Surface-mount terminal 1) Tube packing
Contact arrangement Nominal coil voltage 1.5V DC 3V DC 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC 48V DC Single side stable Part No. TX2S -1.5V TX2S -3V TX2S -4.5V TX2S -5V TX2S -6V TX2S -9V TX2S -12V TX2S -24V TX2S -48V 1 coil latching Part No. TX2S -L-1.5V TX2S -L-3V TX2S -L-4.5V TX2S -L-5V TX2S -L-6V TX2S -L-9V TX2S -L-12V TX2S -L-24V -- 2 coil latching (L2) Part No. TX2S -L2-1.5V TX2S -L2-3V TX2S -L2-4.5V TX2S -L2-5V TX2S -L2-6V TX2S -L2-9V TX2S -L2-12V TX2S -L2-24V -- 2 coil latching (LT) Part No. TX2S -LT-1.5V TX2S -LT-3V TX2S -LT-4.5V TX2S -LT-5V TX2S -LT-6V TX2S -LT-9V TX2S -LT-12V TX2S -LT-24V --
2c
: For each surface-mounted terminal identification, input the following letter. SA type: A, SL type: L, SS type: S Standard packing: Tube: 40 pcs.; Case: 1,000 pcs. Note: Please add "-1" to the end of the part number for AgPd contacts (low level load).
2) Tape and reel packing
Contact arrangement Nominal coil voltage 1.5V DC 3V DC 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC 48V DC Single side stable Part No. TX2S -1.5V-Z TX2S -3V-Z TX2S -4.5V-Z TX2S -5V-Z TX2S -6V-Z TX2S -9V-Z TX2S -12V-Z TX2S -24V-Z TX2S -48V-Z 1 coil latching Part No. TX2S -L-1.5V-Z TX2S -L-3V-Z TX2S -L-4.5V-Z TX2S -L-5V-Z TX2S -L-6V-Z TX2S -L-9V-Z TX2S -L-12V-Z TX2S -L-24V-Z -- 2 coil latching (L2) Part No. TX2S -L2-1.5V-Z TX2S -L2-3V-Z TX2S -L2-4.5V-Z TX2S -L2-5V-Z TX2S -L2-6V-Z TX2S -L2-9V-Z TX2S -L2-12V-Z TX2S -L2-24V-Z -- 2 coil latching (LT) Part No. TX2S -LT-1.5V-Z TX2S -LT-3V-Z TX2S -LT-4.5V-Z TX2S -LT-5V-Z TX2S -LT-6V-Z TX2S -LT-9V-Z TX2S -LT-12V-Z TX2S -LT-24V-Z --
2 Form C
Standard packing: Tape and reel: 500 pcs.; Case: 1,000 pcs. Notes: 1. Tape and reel packing symbol "-Z" is not marked on the relay. "X" type tape and reel packing (picked from 1/2/3/4-pin side) is also available. 2. Please add "-1" to the end of the part number for AgPd contacts (low level load).
All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd.
TX
RATING
1. Coil data 1) Single side stable
Nominal coil voltage 1.5V DC 3V DC 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC 48V DC Pick-up voltage (at 20C 68F) Drop-out voltage (at 20C 68F) Nominal operating current [10%] (at 20C 68F) 93.8mA 46.7mA 31mA 28.1mA 23.3mA 15.5mA 11.7mA 5.8mA 5.6mA Coil resistance [10%] (at 20C 68F) 16 64.3 145 178 257 579 1,028 4,114 8,533 Nominal operating power Max. applied voltage (at 20C 68F)
75%V or less of nominal voltage* (Initial)
10%V or more of nominal voltage* (Initial)
140mW
150%V of nominal voltage
270mW
120%V of nominal voltage
2) 1 coil latching
Nominal coil voltage 1.5V DC 3V DC 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC Set voltage (at 20C 68F) Reset voltage (at 20C 68F) Nominal operating current [10%] (at 20C 68F) 66.7mA 33.3mA 22.2mA 20mA 16.7mA 11.1mA 8.3mA 4.2mA Coil resistance [10%] (at 20C 68F) 22.5 90 202.5 250 360 810 1,440 5,760 Nominal operating power Max. applied voltage (at 20C 68F)
75%V or less of nominal voltage* (Initial)
75%V or less of nominal voltage* (Initial)
100mW
150%V of nominal voltage
3) 2 coil latching (L2, LT)
Nominal coil voltage 1.5V DC 3V DC 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC Set voltage (at 20C 68F) Reset voltage (at 20C 68F) Nominal operating current [10%] (at 20C 68F) Set coil Reset coil 133.9mA 66.7mA 44.5mA 40mA 33.3mA 22.2mA 16.7mA 8.3mA 133.9mA 66.7mA 44.5mA 40mA 33.3mA 22.2mA 16.7mA 8.3mA Coil resistance [10%] (at 20C 68F) Set coil 11.2 45 101.2 125 180 405 720 2,880 Reset coil 11.2 45 101.2 125 180 405 720 2,880 Nominal operating power Set coil Reset coil Max. applied voltage (at 20C 68F
75%V or less of nominal voltage* (Initial)
75%V or less of nominal voltage* (Initial)
200mW
200mW
150%V of nominal voltage
*Pulse drive (JIS C 5442-1986)
All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd.
TX
2. Specifications
Characteristics Contact Item Arrangement Initial contact resistance, max. Contact material Nominal switching capacity Max. switching power Max. switching voltage Max. switching current Min. switching capacity (Reference value)*1 Single side stable Nominal operating 1 coil latching power 2 coil latching Insulation resistance (Initial) Breakdown voltage (Initial) Electrical characteristics Surge breakdown voltage (Initial) Between open contacts Between contact and coil Between contact sets Between open contacts Between contacts and coil Specifications 2 Form C Max. 100 m (By voltage drop 6 V DC 1A) Standard contact: Ag+Au clad, AgPd contact (low level load): AgPd+Au clad (stationary), AgPd (movable) Standard contact: 2 A 30 V DC, AgPd contact: 1 A 30 V DC (resistive load) Standard contact: 60 W (DC), AgPd contact: 30 W (DC) (resistive load) 220V DC Standard contact: 2 A, AgPd contact: 1 A 10A 10mV DC 140 mW (1.5 to 24 V DC), 270 mW (48 V DC) 100 mW (1.5 to 24 V DC) 200 mW (1.5 to 24 V DC) Min. 1,000M (at 500V DC) Measurement at same location as "Initial breakdown voltage" section. 1,000 Vrms for 1min. (Detection current: 10mA) 2,000 Vrms for 1min. (Detection current: 10mA) 1,000 Vrms for 1min. (Detection current: 10mA) 1,500 V (10x160s) (FCC Part 68) 2,500 V (2x10s) (Telcordia) Max. 50C (By resistive method, nominal coil voltage applied to the coil; contact carrying current: 2A.) Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.) Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.) (without diode) Min. 750 m/s2 (Half-wave pulse of sine wave: 6 ms; detection time: 10s.) Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.) 10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10s.) 10 to 55 Hz at double amplitude of 5 mm Min. 108 (at 180 cpm) Min. 105 (2 A 30 V DC resistive), 5x105 (1 A 30 V DC resistive) (at 20 cpm) Ambient temperature: -40C to +85C (up to 24 V coil) -40F to +185F (up to 24 V coil) [-40C to +70C (48 V coil) -40F to +158F (48 V coil)]; Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) 20 cpm Approx. 2 g .071 oz
Rating
Temperature rise (at 20C 68F) Operate time [Set time] (at 20C 68F) Release time [Reset time] (at 20C 68F) Mechanical characteristics Functional Destructive Functional Vibration resistance Destructive Mechanical Electrical Shock resistance Conditions for operation, transport and storage*2 Max. operating speed (at rated load) Unit weight
Expected life
Conditions
Notes: *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. (AgPd contact type or SX relays are available for low level load switching [10V DC, 10mA max. level]) *2 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT.
REFERENCE DATA
1. Maximum switching capacity 2. Life curve 3. Mechanical life
Tested sample: TX2-5V, 10 pcs. Operating speed: 180 cpm
3.0 Switching current, A 2.0 DC resistive load 100 No. of operations x104 50 30 20 10 30V DC resistive load Ratio against the rated voltage, %V 100 90 80 70 60 50 40 30 20 10 0 20 30 50 100 200 300 Contact voltage, V 0 1.0 2.0 Switching current, A 0 10 100 1,000 No. of operations, x104 Drop-out voltage Max. Min. 10,000 Pick-up voltage Max. Min.
1.0
0.5 0.4 0.3 0.2
4. Electrical life (2A 30V DC resistive load)
Tested sample: TX2-5V, 6 pcs. Operating speed: 20 cpm
5-(1). Coil temperature rise Change of contact resistance
100 Contact resistance, m 90 80 70 60 50 40 30 20 Max. Min. Temperature rise, C
Change of pick-up and drop-out voltage
Ratio against the rated voltage, %V 100 90 80 70 60 50 40 30 20 10 0 1 2 3 456789 No. of operations, x104 Min. 10 Drop-out voltage Max. Pick-up voltage Max. Min.
Tested sample: TX2-5V, 6 pcs. Point measured: Inside the coil Ambient temperature: 25C 77F, 85C 185F
70 60 50 40 30 20 10 2A 2A 0A 0A +25C +77F +85C +185F
10 0 1 2 3 456789 4 No. of operations, x10 10
0
100 110
120 130 140 150 Coil applied voltage, %
All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd.
TX
5-(2). Coil temperature rise
Tested sample: TX2-48V, 6 pcs. Point measured: Inside the coil Ambient temperature: 25C 77F, 70C 158F
70 Temperature rise, C 60 50 40 30 20 10 0 100 110 120 130 140 150 Coil applied voltage, % 2A 2A 0A 0A +25C +77F +70C +158F
6-(1). Operate and release time (with diode)
Tested sample: TX2-5V, 10 pcs.
6-(2). Operate and release time (without diode)
Tested sample: TX2-5V, 10 pcs.
5 Operate and release time, ms Operate and release time, ms Operate time Release time 4 Max. Min.
5
Operate time Release time Max. Min.
4
3
3
2
Max. Min.
2 Max. Min. 1 0
1 0
70
80
90 100 110 120 Coil applied voltage, %V
70
80
100 110 120 90 Coil applied voltage, %V
7. Ambient temperature characteristics
Tested sample: TX2-5V, 5 pcs.
8-(1). High frequency characteristics (Isolation)
Tested sample: TX2-12V, 2 pcs.
8-(2). High frequency characteristics (Insertion loss)
Tested sample: TX2-12V, 2 pcs.
Rate of change, %
40
Insertion loss, dB 10 100 Frequency, MHz 1,000
Isolation, dB
20
Drop-out voltage x x
Pick-up voltage
100
1.0 0.8 0.6 0.4
-40 -20
0
20 40 60 80 Ambient temperature, C -20
50
-40
0.2 10 100 Frequency, MHz 1,000
9 Malfunctional shock (single side stable)
Tested sample: TX2-5V, 6 pcs.
Z' Y Y' Z XX' Y 1000m/s 2 Deenergized condition Energized condition
10-(1). Influence of adjacent mounting
Tested sample: TX2-12V, 6 pcs.
Rate of change, % 5 Pick-up voltage 0 -5 ON ON ON
10-(2). Influence of adjacent mounting
Tested sample: TX2-12V, 6 pcs.
Rate of change, % 5 Pick-up voltage 0 -5 ON ON 5 Drop-out voltage 0 OFF -5 OFF 0 2 46 8 10 .079 .157 .236 .315 .394 Inter-relay distance OFF ON
X 1000m/s2
Z 1000m/s2
Rate of change, %
1000m/s 2 Z' 1000m/s 2 Y'
1000m/s2 X'
5 0 -5 0 2 46 8 10 .079 .157 .236 .315 .394 Inter-relay distance Drop-out voltage
OFF OFF
OFF
, mm inch
Rate of change, %
, mm inch
11. Pulse dialing test
Tested sample: TX2-5V, 6 pcs. (35 mA 48 V DC wire spring relay load)
Change of pick-up and drop-out voltage
Ratio against the rated voltage, %V 100 90
Change of contact resistance
100 90 Contact resistance, m
Circuit
80 70 60 50 40 30 20 10 0 10
Pick-up voltage
80 70 60 50 40 30 20 10 Min. Max.
0.08 F 48V DC
+
458 0.08 F
Max. Min.
4 TX 3
-
458 Wire spring relay
Drop-out voltage
Max. Min.
20 30 40 4 No. of operation, x10
50
0
10
20 30 40 No. of operations, x104
50
Note: Data of surface-mount type are the same as those of PC board terminal type. All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd.
TX
DIMENSIONS (mm inch)
The CAD data of the products with a CAD Data mark can be downloaded from: http://panasonic-electric-works.net/ac
1. Standard PC board terminal and Self clinching terminal Single side stable and 1 coil latching type CAD Data External dimensions
Standard PC board terminal
15.00 .591 0.65 .026 8.20 .323 0.50 .020 1.15 .045 7.40 .291
2 coil latching type (L2, LT) External dimensions
Standard PC board terminal
15.00 .591 0.65 .026 8.20 .323 7.40 .291
5.08 .200
2.54 .100
3.50 .138
0.25 5.08 .010 .200
0.50 .020 1.15 .045
5.08 .200
2.54 .100
3.50 .138
0.25 5.08 .010 .200
Self clinching terminal
15.00 .591 0.65 8.20 .026 .323 0.50 .020 1.15 .045 0.25 5.08 .010 .200 7.40 .291
Self clinching terminal
15.00 .591 0.65 .026 8.20 .323 0.50 .020 1.15 .045 7.40 .291
5.08 .200
2.54 .100
3.50 .138
5.08 .200
(1.15) 2.54 (.045) 3.50 .100 .138
0.25 5.08 .010 .200
General tolerance: 0.3 .012
General tolerance: 0.3 .012
PC board pattern (Bottom view)
2.54 .100 10.16 .400
Schematic (Bottom view)
Single side stable 1 coil latching
1 345 1 345
PC board pattern (Bottom view)
2.54 .100 12.7 .500
Schematic (Bottom view)
2 coil latching (L2)
1 3456
2 coil latching (LT) +
1 3456
+
5.08 .200
- +
+
5.08 .200
- -
10 9 8 7
+ -
-
+
12
12
10 9 8
12
10 9 8 10-1.0 dia. 10-.039 dia.
- 12
10 9 8 7
8-1.0 dia. 8-.039 dia.
Direction indication
Direction indication
Direction indication
Direction indication
Tolerance: 0.1 .004
(Deenergized condition)
(Reset condition)
Tolerance: 0.1 .004
(Reset condition)
(Reset condition)
2. Surface-mount terminal
CAD Data
Type
External dimensions (General tolerance: 0.3 .012) Single side stable and 2 coil latching type (L2, LT) 1 coil latching type
15 .591 8.2 8.4 .323 .331 0.65 .026 5.08 .200 15 .591 8.2 Max.10 .323 .394 0.65 .026 0.5 .020 5.08 .200 15 .591 8.2 Max.10 .323 .394 0.65 .026 0.5 .020 5.08 .200 2.54 .100 5.08 .200 7.40.5 .291.020 0.25 .010 0.5 .020 5.08 .200 2.54 .100 5.08 .200 9.40.5 .370.020 7.4 .291 0.25 .010 0.5 .020 5.08 .200 15 .591 8.2 Max.10 .323 .394 0.65 .026 2.54 .100 5.08 .200 7.40.5 .291.020 0.25 .010 2.54 .100 5.08 .200 9.40.5 .370.020 7.4 .291 7.4 .291 15 .591 8.2 8.4 .323 .331 0.65 .026 5.08 .200 15 .591 8.2 Max.10 .323 .394 0.65 .026 2.54 .100 5.08 .200 9.40.5 .370.020 7.4 .291 0.25 .010 2.54 .100 5.08 .200 9.40.5 .370.020 7.4 .291 7.4 .291
Suggested mounting pad (Top view) (Tolerance: 0.1 .004) Single side stable and 1 coil latching type
1 3.16 .039 .124 0.25 .010 5.08 .200 2.54 .100
2 coil latching type (L2, LT)
5.08 1 .200 3.16 .039 .124 2.54 .100
SA type
0.5 .020
0.25 .010 0.5 .020
7.24 .285
7.24 .285
1 3.16 .039 .124
5.08 .200
2.54 .100
5.08 1 .200 3.16 .039 .124 7.24 .285
2.54 .100
SL type
7.24 .285
1 2.16 .039 .085
5.08 .200
2.54 .100 1 2.16 .085 .039 6.24 .246
5.08 .200
2.54 .100
SS type
6.24 .246
Schematic (Top view)
Single side stable 1 coil latching 2 coil latching (L2)
12 10 9 8 7
2 coil latching (LT) - +
12 10 9 8 7
- +
12
10 9 8
+ -
12
10 9 8
- +
+ +
1 3 45 1 3 45
- -
6
1
3
45
1
3
456
Direction indication
Direction indication
Direction indication
Direction indication
(Deenergized condition)
(Reset condition)
(Reset condition)
(Reset condition)
All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd.
TX
NOTES
1. Packing style 1) The relay is packed in a tube with the relay orientation mark on the left side, as shown in the figure below.
Orientation (indicates PIN No.1) stripe
Stopper (gray)
Stopper (green)
2. Automatic insertion To maintain the internal function of the relay, the chucking pressure should not exceed the values below. Chucking pressure in the direction A: 4.9 N {500gf} or less Chucking pressure in the direction B: 9.8 N {1 kgf} or less Chucking pressure in the direction C: 9.8 N {1 kgf} or less
A C B
2) Tape and reel packing (surface-mount terminal type) (1) Tape dimensions (i) SA type
mm inch
1.5 +0.1 dia. 0 Relay polarity bar .059 +.004 dia. 0 2.0 (Z type) .079 4.0 .157
C A B
1.75 .069
11.5 .453
0.4 .016 15.5 .610
Relays
D 16.0 10.0 .394 .630
24.0 0.3 0.2 .945 .012 9.2.008 .362
Please chuck the portion. Avoid chucking the center of the relay. In addition, excessive chucking pressure to the pinpoint of the relay should be avoided. For general cautions for use, please refer to the "Cautions for use of Signal Relays" or "General Application Guidelines".
Tape coming out direction
(ii) SL type
mm inch
1.5 +0.1 dia. 0 Relay polarity bar .059 +.004 dia. 0 2.0 (Z type) .079 4.0 .157 1.75 .069
11.5 .453 15.5 .610
0.4 .016
Relays
10.0 .394 Tape coming out direction
16.0 .630
24.0 0.3 .945 .012
0.2 10.8.008 .425
(iii) SS type
mm inch
1.5 Relay polarity bar .059 (Z type)
+0.1 0 +.004 0
dia. dia. 2.0 .079
4.0 .157
1.75 .069
11.5 .453 15.5 .610
0.4 .016
Relays
16.0 .630 Tape coming out direction
8.0 24.0 0.3 .012 .315 .945 10.80.2 .425.008
(2) Dimensions of plastic reel
mm inch
2.0 .079 13 dia. .512 dia. 21 dia. .827 dia. 380 dia. 14.961 dia. 80 dia. 3.150 dia.
All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd.

▲Up To Search▲

Price & Availability of TX2-12V

	To Download TX2-12V Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .